A319/320/321 Landing Dist Calc 1.0.6

This is a professional-grade metric calculator designed to estimate the in-flight landing distance for Airbus A319, A320, and A321 aircraft powered by IAE and CFM series engines. Users are advised to thoroughly review the following description prior to purchase to ensure suitability.

The calculator utilizes reference distances applicable to standard modification state aircraft. Should your aircraft differ from this standard configuration, this product may not provide accurate results. Careful verification of the provided information is recommended before proceeding with a purchase.

Intended to handle over 99% of routine pilot calculations for determining F3 and Flap Full landing distances on runways classified as 'Dry' or with 'Good' braking conditions, this tool considers factors such as:

• Dry or Good Braking Action
• Flap settings: Flap 3 and Flap Full
• Autobrake settings: Low, Medium, & Max (Manual)
• Altitude: from ISA to ISA+20
• Elevation: Sea level to 9,000 feet
• Reverser usage: none, one, or two reversers
• Runway downhill slope: 0% to 3%
• Speed variations from VLS to VLS+15 knots
• Wind component: tailwinds from 0 to 15 knots
• Safety margins: 0%, 5%, 10%, 15%, or 20%
• Landing types: autoland and overweight landings

The calculator references standard distances based on aircraft model and engine type, including:

• A319-IAE, Dry, Flap Full, Max Manual Brakes at 63.0T = 1000 meters
• A320-IAE, Dry, Flap Full, Max Manual Brakes at 66.0T = 1080 meters
• A321-IAE, Dry, Flap Full, Max Manual Brakes at 78.0T = 1200 meters
• A319-CFM56-B5, Dry, Flap Full, Max Manual Brakes at 63.0T = 1030 meters
• A320-CFM56, Dry, Flap Full, Max Manual Brakes at 66.0T = 1090 meters
• A321-CFM56, Dry, Flap Full, Max Manual Brakes at 78.0T = 1220 meters

While the calculator aims to provide accurate estimates, the Flight Operations Handbook (QRH) remains the definitive resource for calculating landing distances. Users should verify that the results generated align with operational standards and requirements.

This software is not affiliated with or endorsed by Airbus SAS in any capacity.